Just Jump Cups

Just Jump Cups.com



Contact Us








Welcome to Just Jump Cups .com

About Our Jump Cups

If you are looking for quality made jump cups you have come to the right place!  We offer jump cups for dog agility enthusiast or equestrian jump cups.  Our jump cups are made from durable furniture grade PVC snap on clamps and are truly SNAP ON jump cups.  Since these  jump cups are made out of PVC snap on clamps (clamp edges are beveled), not schedule 40 PVC Water Tee's that are cut in half (jump cup depth may be too deep to meet AKC safety regulations!) they stay on your jumps and will not pop off.  Because  these jump cups are true "Snap-On's" they are actually made to fit 3/4", 1" or 1 1/4'  PVC Pipe. They do not loosen over time or slide up and down the poles like plumber tees that are cut in half.

These cups are easily placed and adjusted to any height you want (AKC, NADAC, USDAA). Being a true "Snap-On" jump cup the surface where the jump pole sets can be made flatter (see picture below). This allows the pole to be displaced easily if the bar is knocked by your dog making it less likely to injure your pet.  Deeper "cups" as seen with other imitation snap on jump cups does not allow for this easy displacement.  All our jump cups meet AKC regulations as well as all other agility venue regulations.  All sharp edges on on all our PVC jump cups are hand sanded for safety. 

You may buy all our different size  jump cups in sets of 1 pair (2 jump cups) or 5 pair (10 jump cups).   The Jump Cup Strips can be be bought as a pair for 1 jump or in multiple set of 5 or 10 pair for volume discounts.


Jump Cups

3/4" PVC Jump Cups




1" PVC Jump Cups





1/2" PVC Jump Cups










1 1/4" Jump Cups








Jump Cup Strips - Fits 1" or 1 1/4" PVC


Clip and Go jump cup strips are made of tough, flexible, UV Stabilized polypropylene plastic.
  The sun won't hurt them and they'll stay flexible even at sub-zero temperatures. Each strip has labeled cups every 2" from 4" to 26".

Simply CLIP our jump cup strips onto your 1" or 1 1/4" PVC jumps and you're ready to go. If you want to permanently attach them you can. All you need is a couple of screws and a power screwdriver or cordless drill.

These jump cup strips will work on PVC pipe, Metal frame and wooden jumps. Because of the material we use our product can easily be trimmed to work on your equipment. (see examples)




We use Google Checkout for our credit card payments, or feel free to mail us a check or money order to:

Weave-Poles.com, LLC

30011 Aldine Westfield

Spring, TX  77386


Any Questions?   Question@JustJumpCups.com

Home | Contact Us | Shipping | Returns | Testimonials | Links

This site was last updated 07/26/11